Click image to view full size image
Freestanding central heating cast iron radiator
|
DIMENSIONS Leg Section height :760 mm Middle Section Height: 682 mm Section Length: 59mm Section Depth: 142 mm Bottom Inlet to Floor: 114mm Top Inlet to Floor:714mm Interface Size: G1 1/2
HEAT OUTPUT 128 W/ section
WEIGHT Empty Weight per Mid section 5.2 KG Empty Weight per Leg section 5.5 KG |
Guarantee: 10 years
Packed by: EPE Foam and pallet
Delivered in: 30 days
Delivered ready for installation
Hot Tags: Algeria cast iron water radiators, cast iron radiator, home heating radiator, cast iron radiator parts, radiator manufacturers china, hot water radiators, heater radiator, radiator central heating, hydronic heating radiator, central heating radiator
5 reasons why freestanding central heating cast iron radiator is not hot.Here are the reasons.
1. It is very likely that the heating temperature and pressure of the heat source are too low, resulting in poor heating circulation in residential buildings, so that the radiator is cold.
2. When testing the water, the exhaust part at the end of the heating pipe was not opened, which caused the gas to enter the pipe during the water filling process, and the radiator is not hot.
3.Impurities are mixed into the heating pipes, causing poor water flow.
4.If the heating time is too long, there will be some scale accumulation , the heating pipe will be blocked, the water flow will not be smooth, and the radiator will not be hot.
5. The installation process is not standardized, and the water inlet and outlet are connected reversely, which may also cause the radiator is not hot.
http://www.bzradiator.com/